SUN MASTER
เครื่องกลึง CNC เครื่องกลึงซีเอ็นซีแบบเตียงแบน รุ่น CNL SERIES
Machine Features:
CNL Series
CNL-1740/1760
STANDARD ACCESSORIES:
- CNC Controller
- Tool set and box
- Rotating center MT.4
- Machine light
- Level pads - 6 pcs
- Operation manual & parts list
OPTIONAL ACCESSORIES:
- 3-Jaw scroll 8" chuck
- 4-Jaw independent 10" chuck
- Electric H4 turret
- Drilling socket MT.1 x Ø20
- Boring socket Ø6 xØ20~Ø16 x Ø20
- Quick change tool post
- Hydraulic hollow chuck 8" with rotary cylinder / bar capacity Ø40 for A1-6 spindle only (Working length increased more 25mm)
- Chip conveyor & chip bucket cart
- High pressure coolant pump 3bar 750W
- Hydraulic tailstock quill
- Steady rest w / ball bearing
- Hydraulic P8 turret with boring bar holder Ø20 mm........2 sets boring bar holder Ø25 mm........1 set O.D / facing tool holder........4 sets I.D / facing tool holder........1 set
HEADSTOCK (GEARS AND BEARINGS)
- Headstock bearings and gears are supplied with oil delivered by a pump attached to take on the rear plinth.
- A distributor within the headstock supplies oil to the drive bearings and gears.
Machine Specifications:
| MODEL | CRL-1440 | CRL-1640 | CRL-1660 | ||
|---|---|---|---|---|---|
| Capacity | No. of control axis | 2 AXIS | |||
| Swing over bed | Ø360 mm (14.17") | Ø410 mm (16.14") | Ø410 mm (16.14") | ||
| STD. D1-6 distance between centers | 890 mm (35") | 890 mm (35") | 1400 mm (55") | ||
| STD. D1-6Max. working length |
4 way tool post | 750 mm (29.52") | 750 mm (29.52") | 1260 mm (49.61") | |
| Hyd. P8 turret | 630 mm (24.80") | 630 mm (24.80") | 1140 mm (44.88") | ||
| Max. working dia. | 4 way tool post | Ø170 mm (6.7") | Ø220 mm (8.66") | ||
| Hyd. P8 turret | Ø160 mm (6.29") | Ø210 mm (8.27") | |||
| Width of bed | 260 mm (10.236") | ||||
| Headstock and Main Spindle |
Spindle nose, internal taper | STD. D1-6, MT. No.6 OPT. A1-6, MT. No.6 | |||
| Spindle bore | STD. Ø52.5mm (2.066") OPT. Ø51mm (2") | ||||
| Spindle speed | Gear steps | Pneumatic change 2 steps / | L 25~480 R.P.M. | ||
| Range | H 481~3000 R.P.M. | ||||
| Cross Slide (X-axis) and Carriage (Z-axis) |
Cross slide travel ( X-axis ) STD. | 205 mm (8.07") | 205 mm (8.07") | 205 mm (8.07") | |
| Longitudinal travel ( Z-axis ) STD. | 815 mm (32.08") | 815 mm (32.08") | 1325 mm (52.16") | ||
| AC servo motor ( X-axis ) | 0.75 kW 3.5 N.m | ||||
| AC servo motor ( Z-axis ) | 1.20 kW 7.0 N.m | ||||
| Dia. of ball screw ( X-axis) | Ø20 mm (0.787") P5 C5 | ||||
| Dia. of ball screw ( Z-axis ) | Ø32 mm (1.259") P10 C5 | ||||
| Rapid traverse speed ( X-axis ) | 7.5 m/min (295.3 ipm) | ||||
| Rapid traverse speed ( Z-axis ) | 10 m/min (393.7 ipm) | ||||
| Turret | Tool station | STD. Manual 4 way tool post ☐20 mm | OPT. Elec H4 turret ☐20 mm or Hydraulic P8 turret ☐20 mm Ø20 mm (0.787") |
||
| Size of external turning tool | |||||
| Boring bar diameter | |||||
| Tailstock | Quill diameter | Ø58 mm (2.283") | |||
| Quill travel | 140 mm (5.5") | ||||
| Taper of center | MT.No.4 | ||||
| Motor | Main spindle | 5.5kW/7.5kW (30min, rated) | |||
| Hydraulic oil pump | OPT. 0.75 kW (1 HP) OPT. 1.5kW (2HP) | ||||
| Forced lubrication for headstock | 1 / 4 HP | ||||
| Coolant pump | 1 / 4 HP | ||||
| Tank Capacity | Hydraulic tank | OPT. 40 Litre (8.8 gal.) | |||
| Coolant tank | 50 L (11 gal) | 70 L (15.4 gal) | |||
| Measurements | Weight ( Net / Gross ) Approx. | 2,100 kgs / 2,600 kgs | 2,150 kgs / 2,650 kgs | 2,250 kgs / 2,750 kgs | |
| Packing sizes | Length | 2470 mm (97.24") | 2980 mm (117.32") | ||
| Width x Height | Width 2030 mm (79.92") x Height 2200 mm (86.61") | ||||
Specifications subject to change without notice.