ARES SEIKI - เครื่อง CNC เจาะ ต๊าป
เครื่องเจาะต๊าปแนวนอน H SERIES
Machine Features:
Horizontal CNC Machining Center
FEATURE
- Spindle speed
- STD. 10000rpm
- OPT. 12000rpm/15000rpm/20000rpm/24000rpm
- Mitsubishi 5.5/3.7 kw
- Fanuc5.5/3.7 kw
- Siemens 4.8 kw
- Rapid traverse X,Y,Z: 48/60/48 m/min
- X axes travel 400mm
- Y axes travel 450mm
- Z axes travel 380mm
- Tools capacity 24+1 tools
- ATC time (T-T) 2.5sec
- Table size 400*400mm
Machine Specifications:
| Model | Unit | H4030 | ||
|---|---|---|---|---|
| Table size | mm | 400*400 | ||
| Max. Table load | kg | 200 | ||
| Max. Workpiece dimension (ØxHeight) | mm | Ø480x540 | ||
| Min. lndexing angle of table | degree | 0.001 | ||
| Cumulative indexing precision of table | sec | 20 | ||
| Table repeatability accuracy | sec | 4 | ||
| Drive system for table exchange | - | |||
| Max. rotation diameter of APC | mm | - | ||
| X, Y, Z axis travel | mm | 400*450*380 | ||
| Spindle center to surface of table | mm | 90~540 | ||
| Spindle nose to table center | mm | 190~570 | ||
| 3 axes bidirectional accuracy of positioning | mm | VDI 3441 | ||
| 3 axes bidirectional repeatability repeat positioning | mm | VDI 3441 | ||
| Spindle taper | BT30 | |||
| Pull stud | MAS403 P30T-1(45°) | |||
| Spindle driving | Direct | |||
| Spindle motor | Mitsubishi | kw | 5.5/3.7 | |
| Fanuc | kw | 5.5/3.7 | ||
| Siemens | kw | 4.8 | ||
| X drive motor | Mitsubishi | kw | 1.5 | |
| Fanuc | kw | 1.6 | ||
| Siemens | kw | 2.3 | ||
| Y drive motor | Mitsubishi | kw | 3.0 | |
| Fanuc | kw | 3.0 | ||
| Siemens | kw | 3.3 | ||
| Z drive motor | Mitsubishi | kw | 1.5 | |
| Fanuc | kw | 1.6 | ||
| Siemens | kw | 2.3 | ||
| B drive motor | Mitsubishi | kw | 1.5 | |
| Fanuc | kw | 1.6 | ||
| Siemens | kw | 2.3 | ||
| Spindle speed | rpm | 10000 | ||
| B axis speed | rpm | 16.6 | ||
| X, Y, Z axis rapid traverse | m/min | 48/60/48 | ||
| Tools capacity | tools | 24+1 | ||
| Max. tool weight | kg | 4 | ||
| Max. tool length | mm | 200 | ||
| Max. tool diameter (alternate pocket empty) | mm | 65 (80) | ||
| ATC time (T-T) | sec | 2.5 | ||
| Tool change type | Arm type | |||
| Tank volume | L | 200 | ||
| Coolant pump rate | W | 600 | ||
| Flow rate | I/min | 136 | ||
| Chip flush pump rate | W | 600 | ||
| Flow rate | I/min | 136 | ||
| Net weight | Kg | 3700 | ||
| Floor space | mm | 1835*2593*2407 | ||
Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.