ARES SEIKI - เครื่อง CNC เจาะ ต๊าป
เครื่องเจาะต๊าปแนวตั้ง5หน้าAF SERIES
Machine Features:
5-Face CNC Vertical Machining Center
FEATURE
- Spindle taper BBT40
- Vertical & horizontal dual-purpose spindle
- Built-in spindle speed 8000rpm
- Built-in spindle power 29.3kW
- Built-in spindle torque 107.6Nm.
- C-axis 90∘indexing division rotary table
- Tool magazine capacity 24+1 pcs
- X/Y/Z-axis uses 45mm width roller type linear
Machine Specifications:
| Model | Unit | AF5040 | ||
|---|---|---|---|---|
| Table size | mm | 500 x 500 | ||
| C-axis table indexing angle | deg. | 90° / 0.001° (OP) | ||
| Table load | kg | 600 | ||
| X-axis travel | mm | 1150 | ||
| Y-axis travel | mm | 600 | ||
| Z-axis travel | mm | Vertical spindle 650 / Horizontal spindle 950 | ||
| Vertical spindle nose to table surface | mm | 85~735 / 30~680 (0.001° C-axis table) | ||
| Horizontal spindle nose to table edge | mm | 30～300 | ||
| Horizontal spindle center to table surface | mm | 85~535 / 30~480 (0.001° C-axis table) | ||
| Spindle type | Built-in spindle | |||
| Spindle speeds | Mitsubishi | rpm | 8000 | |
| Siemens | rpm | 8000 | ||
| Fanuc | rpm | 4000(Low) / 8000(High)(H / L-speeds) | ||
| Spindle power | 1/2 H / Cont. | Mitsubishi | Kw | 29.3 / 24.5 |
| Siemens | Kw | 29.3 / 24.5 | ||
| 1/4 H / Cont. | Fanuc | Kw | 15 / 11（Low-speed winding） | |
| Spindle torque | 1/2 H / Cont. | Mitsubishi | Nm | 107.6 / 90.2 |
| Siemens | Nm | 107.6 / 90.2 | ||
| 1/4 H / Cont. | Fanuc | Nm | 59.7 / 45.7（Low-speed winding） | |
| Spindle taper | BBT40 | |||
| X / Y / Z-axis servo motor |
Mitsubishi | Kw | 3.5 / 3.5 / 7.0 | |
| Siemens | Kw | 3.3 / 3.3 / 8.2 | ||
| Fanuc | Kw | 4.5 / 4.5 / 9.0 | ||
| C-axis servo motor 0.001°indexing |
Mitsubishi | Kw | 3.5 | |
| Siemens | Kw | 4.9 | ||
| Fanuc | Kw | 4.5 | ||
| X / Y / Z-axis rapid traverse | m/min | 36 / 36 / 30 | ||
| Max. cutting feedrate | m/min | 10 | ||
| Tool magazine capacity | pcs | 24 | ||
| Max. tool weight | kg | 7 | ||
| Max. tool length | mm | 300 | ||
| Max. tool dia. (w/ adjacent tool) | mm | Ø80 | ||
| Max. tool dia. (w/o adjacent tool) | mm | Ø120 | ||
| LED work light | pcs | 2 | ||
| Hydraulic oil tank | set | 1 (2hp x 30L x 40 kg/cm2) | ||
| Spindle oil cooler | set | 1 | ||
| Screw type chip conveyor | set | 2 | ||
| Tank volume | L | 270 | ||
| Power consumption | kva | 45 | ||
| Net weight | kg | 7800 | ||
| Floor space (L x W x H) | mm |
2800x3585x3160 |
||
Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.