MILLSTAR - เครื่องCNC แมชชีนนิ่ง

Knee Type Milling Machine

Machine Features:

(Auto)X650 / Y360 / Z400

(Manual)X700 / Y360 / Z400

 

    • The main casting part is made of meehanite casting.
    • The spindle is one piece machined from SCM440 alloysteel, thermal refining, high-frequency and precision polishing.
    • Milling head type:

-Variable (VS) Steps (SS) Inverter (VC)

 

8 Steps

60HZ : 80-120-195-320-570-1040-1680-2700(RPM)

50HZ : 68-115-185-285-400-910-1500-2280(RPM)

16 Steps

50HZ : 2P : 136-230-370-570-1080-1820-3000-4560(RPM)

50HZ : 4P : 68-115-185-285-400-910-1500-2280(RPM)

-Inverter type used YASKAWA VFD.

  • Maximum spindle speed up to 4560rpm/50HZ.
  • Used type B belt drive.
  • Hardened and ground X,Y axes slideway.
  • Turcite-B coated on X Y ways.
  • Dovetail slideways.

Machine Specifications:

 
Model Unit JY-15VS JY-15SS JY-15VC
Travel Longitudinal travel (M./A.) mm 700/650 (Opt. 875/825)
Cross travel (M./A.) mm 360
Vertical travel (M./A.) mm 400
Slideway X/Y/Z type △ / △ / △
Quill travel mm 127
Overarm travel mm 457
Overarm swivel degree 360
Quill swivel (R&L)/(F&B) degree ±45/±45
Dist. from spindle nose to table mm 50-450
Spindle centerline to column mm 60-517
Table Dimension mm 1067 x 230 (Opt. 1244x230)
T-slots (Width x No. x Pitch) mm 16 x 3 x 63
Max. table load kg 200
Spindle Milling head type Variable 8/16Steps Inverter
Speed 60Hz rpm 80-2700(8)
50Hz rpm 50 - 3500 68-2280(8) 55-3600
rpm 68-4560(16)
Vertical feeds mm/rev 0.04/0.08/0.15
Taper type NT 30 or R8 (Opt. NT40)
Quill Diameter mm 85
Motor Main spindle HP 3 3 5
Machine Space(L x W x H) mm 1800 x 2200 x 2150
Packing dimension(L x W x H) mm 1480 x 1600 x 1810
Net Weight kg 900
Gross Weight kg 1000