SUN MASTER
เครื่องกลึงมือ เครื่องกลึงแบบคลัช รุ่น AHL SERIES
Machine Features:
STANDARD ACCESSORIES:
AHL - 1840 / 1860 / 1880 / 18120 / 2240 / 2260 / 2280 / 22120
- All models with mechanical clutch. (excluded E.V.S. model)
- All models with auto lubrication system to headstock & external tank for cooling the oil
- All models meet CE. (on request)
- All models with 80mm (3.149") spindle bore, ASA D1-8
STANDARD ACCESSORIES:
- Backplate for 12" chuck
- Spindle center sleeve MT.7
- Operation manual & parts list
- Dead center MT.5
- Level pads......8 pcs
- Halogen lamp
- Dead center MT.5 with carbide tip
- Tool set & Box
- HFull length splash guard
OPTIONAL ACCESSORIES：
3-Jaws scroll 12" chuck / 4-Jaws independent chuck 12" for 18or14" for 21.
Chuck Safety Guards
Electrical system for CE
Carriage micro stop set
Drill chuck & arbor
Rotating center MT.5
Taper turning attachment
Steady rest w/ball bearing
Follow rest w/bronze tip
Quick change tool post
- All castings are properly stabilized and stress relieved.
- Bed ways are hardened & ground to min. HS-70./li>
- Turcite B coating between the bed and carriage.
- Extremely low noise level.
- Foot brake pedal provided.
- Built-in coolant pump & fitting provided.
- CSS (constant surface speed control) on request for E.V.S. model.
- Wider bed way which give absorbs vibration.
Machine Specifications:
| MODEL | AHL-1840 | AHL-1860 | AHL-1880 | AHL-18120 | AHL-2240 | AHL-2260 | AHL-2280 | AHL-22120 | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Height of centers | 230mm (9.055") | 280mm (11.02") | |||||||
| Swing over bed | Ø460mm (18.11") | Ø560mm (22.04") | ||||||||
| Swing in gap | Ø710mm (27.95") | Ø808mm (31.81") | ||||||||
| Swing over cross slide | Ø298mm (11.93") | Ø390mm (15.35") | ||||||||
| Distance between centers | 1000mm(40") | 1500mm(60") | 2000mm(80") | 3000mm(120") | 1000mm(40") | 1500mm(60") | 2000mm(80") | 3000mm(120") | ||
| Width of bed | 345mm (13.58") | |||||||||
| Gap width in front faceplate | 250mm (9.84") | |||||||||
| Headstock and Main Spindle |
Spindle nose, internal taper | D1-8, MT. No.7 | ||||||||
| Spindle center sleeve | MT. No.7 x MT. No.5 | |||||||||
| Spindle bore | Ø80mm (3.149") | |||||||||
| Spindle speed: Gear steps / Range |
16 steps / 20~1600 R.P.M. | |||||||||
| Green | 20 | 65 | 210 | 670 | ||||||
| Yellow | 25 | 85 | 280 | 900 | ||||||
| Red | 35 | 115 | 380 | 1200 | ||||||
| Blue | 50 | 150 | 500 | 1600 | ||||||
| Disc clutch for Forward / Reverse | ||||||||||
| Carriage | Length on bed / Width of carriage | 543mm (21.37") / 542mm (21.33") | ||||||||
| Cross slide travel | 272mm (10.7") | |||||||||
| Top slide travel | 135mm (5.31") | |||||||||
| Threads and Feeds | Whitworth threads: Kinds / Range | 38 Kinds / 2~72 T.P.I. | ||||||||
| Metric threads: Kinds / Range | 40 Kinds / 0.4~14 mm | |||||||||
| D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. | |||||||||
| M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. | |||||||||
| Longitudinal feeds | 0.04~1.0 (0.0015"~0.04") | |||||||||
| Cross feeds | 0.02~0.5 (0.00075"~0.02") | |||||||||
| Tailstock | Quill diameter | Ø76mm (3") | ||||||||
| Quill travel | 165 mm (6.5") | |||||||||
| Taper of center | MT. No.5 | |||||||||
| Motor | Main spindle | 10HP | 12.5HP | |||||||
| Forced lubrication for HD. | -- | |||||||||
| Coolant pump | 1/8 HP | |||||||||
| Measurement | Weight (Net / Gross) Approx. | 2000kgs 2140kgs |
2200kgs 2360kgs |
2500kgs 2700kgs |
3000kgs 3260kgs |
2150kgs 2290kgs |
2350kgs 2510kgs |
2650kgs 2850kgs |
3150kgs 3410kgs |
|
| Packing size | Length | 2535mm (99.8") | 3035mm (119.5") | 3535mm (139.2") | 4624mm (182")") | 2535mm (99.8") | 3035mm (119.5") | 3535mm (139.2") | 4624mm (182") | |
| Width x Height | Width 1120mm (44.1") x Height 1900mm (74.8") | |||||||||
Specifications subject to change without notice.