SUN MASTER

FC SERIES

Machine Features:

STANDARD ACCESSORIES :

  • Backplate for 10" chuck
  • Dead center MT.5
  • Dead center MT.4 with carbide tip
  • Spindle center sleeve.Ø85mm Taper 1/19.18
  • Level pads......6 pcs
  • Tool set & Box
  • Operation manual & parts list
  • Full length splash guard
  • Halogen lamp

 

OPTIONAL ACCESSORIES:


3-Jaws scroll 10" chuck
4-Jaws independent 12" chuck

Digital read out system

Faceplate 14"

Chuck Safety Guards

Electrical system for CE

Carriage micro stop set

Drill chuck & arbor

Rotating center MT.4

Taper turning attachment

Steady rest w/ball bearing

Follow rest w/bronze tip


Quick change tool post

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HRC48-55.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • Wider bed way which give absorbs vibration.
  • Y-Δ type spindle motor equipped to make sure smooth start and operatrion.


  


GEAR BOX
  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

HEADSTOCK
  • Housing isvibration-absorbent, deflection-free.
  • Gears arehardened&MAAGorREISHAUER ground.

APRO
  • R/HorL/Hwheelcanbeavailableon request.
  • Integrated automatic control for longitudinal & cross feeds, forward &reverse feeds.

CARRIAGE & SLIDE
  • Anti-Floatdesignbacklasheliminatorfitted in cross slide nut.
  • Safety clutch at feed shaft.
  • Oneshot lubrication in carriage & top slide.
  • Dual dials supply inchsystem screw.
  • Metric dial supply metric system only.

Machine Specifications:

 
MODEL FC-1640 FC-1660 FC-1840 FC-1860 FC-1880 FC-2140 FC-2160 FC-2180
Capacity Height of centers 205 mm (8.07") 231 mm (9.05") 271 mm (10.67")
Swing over bed 410 mm (16.14") Ø462 mm (18.11") Ø542 mm (21.34")  
Swing in gap 583 mm (22.95") Ø650 mm (25.59") Ø730 mm (28.74")
Swingovercrossslide 262 mm (10.3") Ø305 mm (12") Ø387 mm (15.23")
Distance between centers 1000mm(40") 1500mm(60") 1000mm(40") 1500mm(60") 2200mm(86.6") 1000mm(40") 1500mm(60") 2200mm(86.6")
Width of bed 320mm (12.5")
Headstock and
Main Spindle
Spindle nose, internal taper D1-8 / A1-8 (opt.), Ø85mm Taper 1/19.18
Spindle center sleeve Ø85mm Taper 1/19.18 x MT. No.5
Spindle bore Ø80mm (3.149")
Spindlespeed:Gearsteps/Range 12 steps /
A 26 40 60 90 rpm
B 105 145 205 305 rpm
C 510 715 1000 1500 rpm
Carriage Cross slide travel 250 mm (9.84") 300 mm (11.81")
Top slide travel 150 mm (5.9")
Threads and Feeds Whitworth threads: Kinds / Range 45 kinds / 2~72 T.P.I..
Metric threads: Kinds / Range 39 kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 (0.0015"~0.04")
Cross feeds 0.02~0.5 (0.00075"~0.02")
Tailstock Quill diameter Ø59 mm (2.322") Ø68mm(2.677") Ø59 mm (2.322") Ø68mm(2.677")
Quill travel 127 mm (5") 153 mm (6") 127 mm (5") 153 mm (6")
Taper of center MT. No.4
Motor Main spindle std. 10 HP (7.5 kW) opt. 12.5 HP (9.375 kW)
Forced lubrication for headstock N/A
Coolant pump 1/8 HP
Measurement Weight Approx NET 1750kgs 1900kgs 1800kgs 1950kgs 2350kgs 1850kgs 2000kgs 2400kgs
Packing size GROSS 1950kgs 2150kgs 2000kgs 2200kgs 2650kgs 2050kgs 2250kgs 2700kgs
Length 2400mm 2900mm 2400mm 2900mm 3700mm 2400mm 2900mm 3700mm
Width x Height width 1155 mm (45.5") X height 1900 mm (74.8")

Specifications subject to change without notice.