SUN MASTER

เครื่องกลึงมือ เครื่องกลึงความเร็วสูง รุ่น CH-V SERIES

Machine Features:

STANDARD ACCESSORIES :

CH-V Series

  • CH-2260V / 2290V / 22120V 22160V / 22200V
  • CH-2660V / 2690V / 26120V 26160V / 26200V
  • CH-3060V / 3090V / 30120V 30160V / 30200V
  • Backplate for 12" chuck
  • Dead center MT.5
  • Dead center MT.5 with carbide tip
  • Spindle center sleeve MT#7 * MT#5
  • Level pads......6 ~ 10 pcs
  • Tool set & Box
  • Operation manual & parts list
  • Full length splash guard
  • Halogen lamp

 

OPTIONAL ACCESSORIES:


3-Jaws scroll 12" / 16" chuck
4-Jaws independent 16 / 18" chuck

 


Digital read out system

 


Faceplate 20"

 


Chuck Safety Guards

 


Electrical system for CE

 


Carriage micro stop set

 


Drill chuck & arbor

 


Rotating center MT.5

 


Taper turning attachment

 


Steady rest w/ball bearing

 


Follow rest w/bronze tip

 


Quick change tool post

 

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HRC48-55.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Wider bed way which give absorbs vibration.
  • Y-Δ type spindle motor equipped to make sure smooth start and operation.
  • Oil distributor may be adjusted to lubricate bedways, cross slide, or both.
  • Automatic and manual forced lubrication pump offered oil to bed ways and cross slide.

RUGGED HEADSTOCK
  • Forced lubrication to all running points.
  • Head housing features outstanding vibration dampening and deformation free performance.
  • Rugged head constructiongives extra rigidity and heavy cutting.
  • All gears and shaft are hardened and precision ground.

 


UNIVERSAL GEARBOX
  • Theuniversaltypegearboxprovides a wide range of inch & metric threads without changing any gear for increasing convenience.
  • Gears are hardened
  • Oil bath lubrication in gear box

 


HEAVY DUTY SPINDLE
  • CamlocktypespindlePrecisionmachinedfromforged alloy steel, hardened,
  • precision ground and dynamically balanced.
  • Three-point support by high precision taper roller and ball bearings eliminates chatter when performing heavy cutting

 


APRON
  • Amanual&automaticlubricationsystemequippedto keep the sliding ways and bedways lubricated.
  • Choice of right or left hand wheel.
  • An overload protection device equipped to avoid machine damaged.

Machine Specifications:

 
 MODEL   CH-2260V / 2290V / 22120V
22160V / 22200V
 CH-2660V / 2690V / 26120V
26160V / 26200V
CH-3060V / 3090V / 30120V
30160V / 30200V 
 Capacity    
 Swing over bed 560 mm (22")     660 mm (26") 760 mm (30")
 Swing in gap Ø797 mm (31.37")     Ø892 mm (35.11") Ø990 mm (38.97")
 Swing over cross slide    Ø340 mm (13.38") Ø445 mm (17.51") Ø548 mm (21.57")
 Gap width in front of faceplate 270 mm (10.63")
 Distance between centers 1500 mm (60"), 2300 mm (90"), 3000 mm (120"), 4000 mm (160"), 5000 mm (200")
 Width of bed 400 mm (15.75")
 Top slide travel 228 mm (8.98")
 Cross slide travel  400 mm (15.75")  
 Headstock & Main spindle    
 Spindle nose type D1-11
 Spindle center sleeve    MT#7 x MT#5
 Spindle bore  Ø104 mm (4.094")  
 Spindle speed  4 steps   
 Speed range (60 Hz) N1: 20 ~ 109 rpm; N2: 45 ~ 240 rpm; N3: 140 ~ 740 rpm; N4: 310 ~ 1600 rpm
 Threads and Feeds    
 Whitworth threads kinds / range 44 Kinds / 2 ~ 72 T.P.I.
 Metric threads kinds / range 39 Kinds / 0.2 ~ 14 mm
 Diameter of leadscrew Ø45 mm (1.77")
 Pitch of leadscrew 4 TPI, P = 6 mm
 Longitudinal feeds    Metric: 0.035 ~ 0.98 mm / rev; INCH: 0.0012 ~ 0.039 / rev
 Cross feeds    Metric: 0.011 ~ 0.296 mm / rev; INCH: 0.0004 ~ 0.0117 / rev
 Tailstock    
 Quill diameter    Ø80 mm (3.15")
 Quill travel    250 mm (10")
 Taper of center    MT # 5
 Motor    
 Main spindle    15 HP (11.25 kW) Motor + 20 HP (15 kW) Inverter
 Coolant pump    1/8 HP
 Measurement    
 Weight Approx 60"   2860   2950   3040
 Net weight (KG)  90" 3310   3400   3490
   120" 3545   3635   3725
   160" 4150   4240   4330
   200" 4600   4690   4780
 Packing size length    3255 mm (128.14") / 4055 mm (159.64") / 4755 mm (187.2") / 5755 mm (226.57") / 6755 mm (265.94")
 Width x Height    Width: 1150 mm (45.27 "); Height: 1700 mm (66.9")

Specifications subject to change without notice.