SUN MASTER
เครื่องกลึงมือ เครื่องกลึงความเร็วสูง รุ่น CH-V SERIES
Machine Features:
STANDARD ACCESSORIES :
CH-V Series
- CH-2260V / 2290V / 22120V 22160V / 22200V
- CH-2660V / 2690V / 26120V 26160V / 26200V
- CH-3060V / 3090V / 30120V 30160V / 30200V
- Backplate for 12" chuck
- Dead center MT.5
- Dead center MT.5 with carbide tip
- Spindle center sleeve MT#7 * MT#5
- Level pads......6 ~ 10 pcs
- Tool set & Box
- Operation manual & parts list
- Full length splash guard
- Halogen lamp
OPTIONAL ACCESSORIES:
3-Jaws scroll 12" / 16" chuck
4-Jaws independent 16 / 18" chuck
Digital read out system
Faceplate 20"
Chuck Safety Guards
Electrical system for CE
Carriage micro stop set
Drill chuck & arbor
Rotating center MT.5
Taper turning attachment
Steady rest w/ball bearing
Follow rest w/bronze tip
Quick change tool post
- All castings are properly stabilized and stress relieved.
- Bed ways are hardened & ground to min. HRC48-55.
- Extremely low noise level.
- Foot brake pedal provided.
- Wider bed way which give absorbs vibration.
- Y-Δ type spindle motor equipped to make sure smooth start and operation.
- Oil distributor may be adjusted to lubricate bedways, cross slide, or both.
- Automatic and manual forced lubrication pump offered oil to bed ways and cross slide.
RUGGED HEADSTOCK
- Forced lubrication to all running points.
- Head housing features outstanding vibration dampening and deformation free performance.
- Rugged head constructiongives extra rigidity and heavy cutting.
- All gears and shaft are hardened and precision ground.
UNIVERSAL GEARBOX
- Theuniversaltypegearboxprovides a wide range of inch & metric threads without changing any gear for increasing convenience.
- Gears are hardened
- Oil bath lubrication in gear box
HEAVY DUTY SPINDLE
- CamlocktypespindlePrecisionmachinedfromforged alloy steel, hardened,
- precision ground and dynamically balanced.
- Three-point support by high precision taper roller and ball bearings eliminates chatter when performing heavy cutting
APRON
- Amanual&automaticlubricationsystemequippedto keep the sliding ways and bedways lubricated.
- Choice of right or left hand wheel.
- An overload protection device equipped to avoid machine damaged.
Machine Specifications:
| MODEL | CH-2260V / 2290V / 22120V 22160V / 22200V |
CH-2660V / 2690V / 26120V 26160V / 26200V |
CH-3060V / 3090V / 30120V 30160V / 30200V |
|||
|---|---|---|---|---|---|---|
| Capacity | ||||||
| Swing over bed | 560 mm (22") | 660 mm (26") | 760 mm (30") | |||
| Swing in gap | Ø797 mm (31.37") | Ø892 mm (35.11") | Ø990 mm (38.97") | |||
| Swing over cross slide | Ø340 mm (13.38") | Ø445 mm (17.51") | Ø548 mm (21.57") | |||
| Gap width in front of faceplate | 270 mm (10.63") | |||||
| Distance between centers | 1500 mm (60"), 2300 mm (90"), 3000 mm (120"), 4000 mm (160"), 5000 mm (200") | |||||
| Width of bed | 400 mm (15.75") | |||||
| Top slide travel | 228 mm (8.98") | |||||
| Cross slide travel | 400 mm (15.75") | |||||
| Headstock & Main spindle | ||||||
| Spindle nose type | D1-11 | |||||
| Spindle center sleeve | MT#7 x MT#5 | |||||
| Spindle bore | Ø104 mm (4.094") | |||||
| Spindle speed | 4 steps | |||||
| Speed range (60 Hz) | N1: 20 ~ 109 rpm; N2: 45 ~ 240 rpm; N3: 140 ~ 740 rpm; N4: 310 ~ 1600 rpm | |||||
| Threads and Feeds | ||||||
| Whitworth threads kinds / range | 44 Kinds / 2 ~ 72 T.P.I. | |||||
| Metric threads kinds / range | 39 Kinds / 0.2 ~ 14 mm | |||||
| Diameter of leadscrew | Ø45 mm (1.77") | |||||
| Pitch of leadscrew | 4 TPI, P = 6 mm | |||||
| Longitudinal feeds | Metric: 0.035 ~ 0.98 mm / rev; INCH: 0.0012 ~ 0.039 / rev | |||||
| Cross feeds | Metric: 0.011 ~ 0.296 mm / rev; INCH: 0.0004 ~ 0.0117 / rev | |||||
| Tailstock | ||||||
| Quill diameter | Ø80 mm (3.15") | |||||
| Quill travel | 250 mm (10") | |||||
| Taper of center | MT # 5 | |||||
| Motor | ||||||
| Main spindle | 15 HP (11.25 kW) Motor + 20 HP (15 kW) Inverter | |||||
| Coolant pump | 1/8 HP | |||||
| Measurement | ||||||
| Weight Approx | 60" | 2860 | 2950 | 3040 | ||
| Net weight (KG) | 90" | 3310 | 3400 | 3490 | ||
| 120" | 3545 | 3635 | 3725 | |||
| 160" | 4150 | 4240 | 4330 | |||
| 200" | 4600 | 4690 | 4780 | |||
| Packing size length | 3255 mm (128.14") / 4055 mm (159.64") / 4755 mm (187.2") / 5755 mm (226.57") / 6755 mm (265.94") | |||||
| Width x Height | Width: 1150 mm (45.27 "); Height: 1700 mm (66.9") | |||||
Specifications subject to change without notice.