KENT
KGS-Surface Grinder Wizard Master Series
Machine Features:
- WM(A1): Mitsubishi PLC control system and servo drive on down feed mechanism (Y axis). WM(A2): Mitsubishi PLC control system and servo drive on down feed and crossfeed mechanism (Y and Z axis)
- The high rigidity spindle powered with V3 grade motor and super precision angular contact ball bearings, improves processing efficiency and heavy cutting ability.
- Castings are made of high quality ribbed cast iron, stress released by annealing to achieve extreme rigidity.
- Longitudinal slide ways (X axis) designed with double V slideways, to assure high-accuracy grinding efficiency.
- Y axis is equiped with box ways, driven by servo motor with high precision ball screw.
- Z axis is equiped with V slideways, driven by servo motor with high precision ball screw
- The column in sturdy double walled design strengthens the rigidity and improve the cutting efficiency.
- Turcite B coating on slide ways of X and Z Axis to ensure smooth, accurate movement but also long- lasting performance.
- Graphical user interface with Mitsubishi color touchscreen in ergonomic design, easy and convenient to operate.
- The control panel with ergonomic design to optimize operating experience and offer convenient operation environment.
- Vertical feed (Y axis) 0.001 mm per graduation of hand wheel.
- Cross feed (Z axis) 0.02mm for WM(A)1 per graduation of hand wheel.
- Cross feed (Z axis) 0.001mm for WM(A)2 per graduation of MPG.
- Automatic wheel dressing with compensation in WMA1/ WMA2 series. The wheel dresser is mounted overhead and feed driven by servo motor. The dressing feed can be set by program or by MPG (dressed manually).
- Cross feed is hydraulically driven and speed is adjustable on panel or set by program.
- Grinding modes: plane grinding, gully grinding and wide slot grinding (The slot should be wider than grinding wheel).
| STANDARD ACCESSORIES | WM1 | WMA1 | WM2 | WMA2 |
|---|---|---|---|---|
| 1 | Grinding wheel | Grinding wheel | Grinding wheel | Grinding wheel |
| 2 | Wheel balancing stand & arbor | Wheel balancing stand & arbor | Wheel balancing stand & arbor | Wheel balancing stand & arbor |
| 3 | Wheel flange & extractor | Wheel flange & extractor | Wheel flange & extractor | Wheel flange & extractor |
| 4 | Levelling pad & bolt | Levelling pad & bolt | Levelling pad & bolt | Levelling pad & bolt |
| 5 | Tool box & tools | Tool box & tools | Tool box & tools | Tool box & tools |
| 6 | Table splash guard & rear splash guard | Table splash guard & rear splash guard | Table splash guard & rear splash guard | able splash guard & rear splash guard |
| 7 | Working lamp | Working lamp | Working lamp | Working lamp |
| 8 | Wheel dressing diamond tip & holder | Wheel dressing diamond tip & holder | Wheel dressing diamond tip & holder | Wheel dressing diamond tip & holder |
| 9 | Automatic wheel dressing and compensate | Oil chiller | Automatic wheel dressing and compensate | |
| 10 | Oil chiller |
Machine Specifications:
| Specifcation | UNIT |
KGS-510 WM1/WMA1 |
KGS-510 WM2/WMA2 |
KGS-515 WM1/WMA1 |
KGS-515 WM2/WMA2 |
KGS-615 WM1/WMA1 |
KGS-615 WM2/WMA2 |
KGS-620 WM1/WMA1 |
KGS-620 WM2/WMA2 |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| CAPACITY | OVERALLTABLE.WORKING.AREA | mm | 1000*500 | 1000*500 | 1500*500 | 1500*500 | 1500*600 | 1500*600 | 2000*600 | 2000*600 | |
| LONGITUDINAL TABLE TRAVEL | mm | 1140 | 1140 | 1600 | 1600 | 1600 | 1600 | 2230 | 2230 | ||
| CRISS FEED TABLE TRAVEL | mm | 540 | 540 | 570 | 570 | 660 | 660 | 660 | 660 | ||
| DISTANCE SPINDLE CENTER TO TABLE | mm | 575 | 575 | 600 | 600 | 600 | 600 | 600 | 600 | ||
| TABLE.LOAD.INCLUDING.MAGNETIC.CHUCK | kgs | 1000 | 1000 | 1200 | 1200 | 1300 | 1300 | 1500 | 1500 | ||
| TABLE&CROSS FEED | T-SLOT | mm*N | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | |
| LONGTUDINAL TABLE SPEED | mm/min | 1~25 | 1~25 | 1~25 | 1~25 | 1~25 | 1~25 | 1~25 | 1~25 | ||
| CROSS FEED ON HAND WHEEL | LGRA. | mm | 0.02 | 0.01 | 0.02 | 0.01 | 0.02 | 0.01 | 0.02 | 0.01 | |
| LREV. | mm | 5 | 1 | 5 | 1 | 5 | 1 | 5 | 1 | ||
| AUTO CROSS FEED PER STROKE | mm | 0.01 | 0.01~99.99 | 0.01 | 0.01~99.99 | 0.01 | 0.01~99.99 | 0.01 | 0.01~99.99 | ||
| RAPID TRAVEL | 50Hz | mm/min | 1250 | 1500 | 1250 | 1500 | 1250 | 1500 | 1250 | 1500 | |
| 60Hz | mm/min | 1500 | 1500 | 1500 | 1500 | ||||||
| GRINDING WHEEL | WHEEL DIMENSIONS | mm | 355*38*127 | 355*38*127 | 355*50.8*127 | 355*50.8*127 | 355*50.8*127 | 355*50.8*127 | 355*50.8*127 | 355*50.8*127 | |
| SPINDLE SPEED | 50Hz | r.p.m | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | |
| 60Hz | r.p.m | 1740 | 1740 | 1740 | 1740 | 1740 | 1740 | 1740 | 1740 | ||
| VERTICAL MOVEMENT | VERTCAL ON MPG*1 | LGRA. | mm | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| LREV. | mm | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | ||
| AUTO DOWN FEED INCREMANT | mm | 0.001~0.099 | 0.001~0.099 | 0.001~0.099 | 0.001~0.099 | 0.001~0.099 | 0.001~0.099 | 0.001~0.099 | 0.001~0.099 | ||
| RAPID ELEVATING | 50Hz | mm/min | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | |
| 60Hz | mm/min | ||||||||||
| MOTOR |
SPINDLE MOTOR | KW*P | 5.6*4 | 5.6*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | |
| ELEVATING MOTOR | KW | 0.6(AC servo) | 0.6(AC servo) | 0.6(AC servo) | 0.6(AC servo) | 0.6(AC servo) | 0.6(AC servo) | 0.6(AC servo) | 0.6(AC servo) | ||
| HYDRAULC MOTOR | KW*P | 2.2*6 | 2.2*6 | 3.7*6 | 3.7*6 | 3.7*6 | 3.7*6 | 3.7*6 | 3.7*6 | ||
| CRODD FEED MOTOR | K*P | 190*6 | 190*6 | 190*6 | 190*6 | ||||||
| KW | 0.75(ACservo) | 0.75(ACservo) | 0.75(ACservo) | 0.75(ACservo) | |||||||
| DIMENSION AND WEIGHT | MACHINE HEIGHT | mm | 2440 | 2400 | 2445 | 24445 | 24455 | 2445 | 2470 | 2470 | |
| FLOOR SPACE | mm | 4445*2100 | 4445*2100 | 5810*2445 | 2810*2445 | 5810*2545 | 2810*2545 | 6200*2700 | 6200*2700 | ||
| NET WEIGHT | kgs | 5000 | 5000 | 6000 | 6000 | 62500 | 6250 | 8500 | 8500 | ||
| GROSS WEIGHT | kgs | 6000 | 6000 | 7000 | 7000 | 7250 | 7250 | 9700 | 9700 | ||