In this article, we will discuss the differences between tube and sheet laser cutting.
Laser cutting of tube and sheet metal, alike yet different
Laser cutting is really nothing new in the manufacturing industry. After decades of development and marketing of increasingly higher performing automated systems, we can say that, not unlike other more mature technologies, we are moving towards the “commoditization” phase, i.e. a cultural shift in the perception and use of this technology.
Years ago, a laser cutting system was a major investment due to its initial purchase price but also for operator training and the constant maintenance protocols which had to be followed to ensure productivity and system availability both long term and on the daily basis.
Things have changed a lot with the proliferation of fibre laser sources, increased automation and standardization of components for both the automation and the laser parts.
The initial investment has gradually been reduced, partly because of ever-increasing competition but also the significant reduction of the training
So, we will analyze the criteria that make the evaluation of a tube cutting system different and more complex than that of a sheet cutting system.
Tube laser cutting
The first thing that jumps out at you when you look at a laser tube cutting system is that the material moves throughout the process.
Contrary to what happens with sheets, after being loaded and taken into the cutting area the tube continues to be moved during the job back and forth, with rotations at high speed and at times high acceleration.
This has important consequences for both the reliability and productivity of the system.
Thin, flexible tubes tend to bend and jam if they are not properly guided, increasing the risk of frequent interruptions. Heavy tubes apply stress to the machine with shocks and vibrations that require mechanical robustness and specific solutions to ensure the system remains efficient over time.
Special section tube laser-cutting: Many shapes in one solution Another feature of the tube compared to sheet metal is the availability of a huge number of different shapes, sections, and profiles (material and thickness variety is on a par with sheet processing).
These range from the simplest round, square and rectangular tubes that were first sections that could be processed on the earlier systems to the more complex sections, with variable thickness, open concave profiles.
Each section and shape poses challenges for its correct management from loading, handling, correctly adjusting the laser power for consistently high-quality cuts to unloading.
From short light-weight tubes to the large, heavy sections such as those used in the structural sector, there are numerous features and solutions that the system must have in place to ensure that processing is always reliable and sustainable.
The geometries to be obtained can also make a difference. Just think about the importance of correctly inserting micro-joints to make parts that otherwise could not be feasible. Automatic management, where available, allows part feasibility but also, and above all, for the correct use of the system by protecting it from potentially unwelcome circumstances that only expert users could detect and prevent when creating the part programs for a laser tube cutting system.
the management of flat sheet cutting is much more limited . The parts remain stationary and retained within the sheet from which they have been cut, regardless of thickness, material, type of cut or geometries obtained, the ever-increasing cost of metals, it is no longer conceivable to tolerate the under-use of raw material and the generation of excess scrap to be discarded
It is also unthinkable to buy extra material beyond the given the number of parts to be made. Apart from a few initial trials to optimize the process parameters and strike the right balance between productivity and cutting quality, once production is up and running you must be able to count on maximum use of the material available.
In the sheet world, this is achieved through nesting or compaction algorithms that position and rotate all the parts to bring them as close together as possible. This leaves minimal waste and allows more parts to fit on each sheet.
The same applies to the tubes but with a slight additional complication. Once again, the three-dimensionality of the tube makes it more complicated to compact the parts – especially if they are different from each other.
Anyone working in the tube industry knows that geometric tolerances in tube production, torsion and axial bending problems, dirt or rust on the surface, are issues operators need to be prepared to deal with.
Of these problems, only a small proportion also affect sheet metal, so it is easy to see why obtaining parts from the tube, of consistent quality, within a reasonable timeframe and without waste, is anything but simple. To achieve this, technical solutions are once again required that are able to recognize and compensate for variations on the tube shape and can effectively manage the presence of dirt and rust. It is also advisable that the laser power itself is correctly adjusted according to the advancement speed at all points along the path, to avoid burns and loss of the cut where the thickness is not constant or where the curvature of the profile changes
Laser sources for tube cutting: Less power, more control!
Another important difference between the world of sheet metal and that of tubes concerns the power of the laser sources installed on the cutting system. In recent times, we have seen the size of laser sources on sheet metal installations grow to extreme levels (over 15 kW and up to 30 kW!)
Once again, it is the geometry of the material that provides the answer. One issue is the impossibility of travelling long distances at high speed as on a flat sheet. Secondly, the thickness range that can be processed is much more limited for the tube (with thicker material, the weight limits allowed by the installations are quickly reached). Finally, the fact that the tube itself is a closed shape, i.e. with one side opposite the side to be cut, limits the maximum power that can be used to prevent burns and overheating of cut and uncut walls.
The sheet does not have the problem of having an opposite wall and therefore the power used to cut (when well managed) once it has exceeded the thickness is dispersed onto the support grid.
The primary differences between tube and sheet laser cutting In this article, we will discuss the primary differences between tube and sheet laser cutting. There are several basic criteria that anyone wanting to switch from laser cutting of sheet metal to laser cutting of tubes or vice versa should know.
Laser cutting is really nothing new in the manufacturing industry. After decades of development and marketing of increasingly higher performing automated systems, we can say that, not unlike other more mature technologies, we are moving towards the “commoditization” phase, i.e. a cultural shift in the perception and use of this technology.
Years ago, a laser cutting system was a major investment due to its initial purchase price but also for operator training and the constant maintenance protocols which had to be followed to ensure productivity and system availability both long term and on the daily basis.
Things have changed a lot with the proliferation of fibre laser sources, increased automation and standardization of components for both the automation and the laser parts.
The initial investment has gradually been reduced, partly because of ever-increasing competition but also the significant reduction of the training and experience required as the direct result of the extensive use of integrated sensors. We are close to having diagnostic and preventive maintenance systems that can promise plant availability near 100%.
This scenario, favorable to end-users, is certainly closer for manufacturers of sheet metal laser cutting systems. The high number of competitors and the gradual levelling out of technical content is driving manufacturers to reduce their margins (when they have no alternative) or otherwise to integrate extra features, both tangible and intangible.
We can expect the laser tube cutting sector to follow a similar evolution. And yet, despite the significant steps towards simplification and cost-efficiency, the offer is still highly differentiated in terms of technical content.
So, we will analyze the criteria that make the evaluation of a tube cutting system different and more complex than that of a sheet cutting system.
Tube laser cutting: “And yet it moves!” The first thing that jumps out at you when you look at a laser tube cutting system is that the material moves throughout the process.
Contrary to what (usually) happens with sheets, after being loaded and taken into the cutting area the tube continues to be moved during the job back and forth, with rotations at high speed and at times high acceleration.
Handling of a tube in a laser cutting systemThe first thing that jumps out at you when you look at a laser tube cutting system is that the material moves throughout the process.
This has important consequences for both the reliability and productivity of the system.
Thin, flexible tubes tend to bend and jam if they are not properly guided, increasing the risk of frequent interruptions. Heavy tubes apply stress to the machine with shocks and vibrations that require mechanical robustness and specific solutions to ensure the system remains efficient over time.
Special section tube laser-cutting: Many shapes in one solution Another feature of the tube compared to sheet metal is the availability of a huge number of different shapes, sections, and profiles (material and thickness variety is on a par with sheet processing).
These range from the simplest round, square and rectangular tubes that were first sections that could be processed on the earlier systems to the more complex sections, with variable thickness, open concave profiles.
Each section and shape poses challenges for its correct management from loading, handling, correctly adjusting the laser power for consistently high-quality cuts (see below) to unloading.
From short light-weight tubes to the large, heavy sections (cut into lengths of several metres) such as those used in the structural sector, there are numerous features and solutions that the system must have in place to ensure that processing is always reliable and sustainable.
The geometries to be obtained can also make a difference. Just think about the importance of correctly inserting micro-joints to make parts that otherwise could not be feasible. Automatic management, where available, allows part feasibility but also, and above all, for the correct use of the system by protecting it from potentially unwelcome circumstances that only expert users could detect and prevent when creating the part programs for a laser tube cutting system.
the management of flat sheet cutting is much more limited (at least for most systems). The parts remain stationary and retained within the sheet from which they have been cut, regardless of thickness, material, type of cut or geometries obtained
Laser-cut special section tubeEach section and shape pose challenges for its correct management from loading, handling, correctly adjusting the laser power for consistently high-quality cuts to unloading.
Nesting algorithms: Savings begin where the waste ends
With the ever-increasing cost of metals, it is no longer conceivable to tolerate the under-use of raw material and the generation of excess scrap to be discarded (or recycling at best).
It is also unthinkable to buy extra material beyond the given the number of parts to be made. Apart from a few initial trials to optimize the process parameters and strike the right balance between productivity and cutting quality (always subjective according to the application sector and your own style), once production is up and running you must be able to count on maximum use of the material available.
In the sheet world, this is achieved through nesting or compaction algorithms that position and rotate all the parts to bring them as close together as possible. This leaves minimal waste and allows more parts to fit on each sheet.
The same applies to the tubes but with a slight additional complication. Once again, the three-dimensionality of the tube makes it more complicated to compact the parts – especially if they are different from each other.
Nesting for tube cuttingRepresentation of material savings in laser tube cutting using nesting algorithms.
A joint made by laser cutting large tubes and beamsA joint made by laser cutting large tubes and beams.
Laser sources for tube cutting: Less power, more control!
Another important difference between the world of sheet metal and that of tubes concerns the power of the laser sources installed on the cutting system.
Once again, it is the geometry of the material that provides the answer. One issue is the impossibility of travelling long distances at high speed as on a flat sheet. Secondly, the thickness range that can be processed is much more limited for the tube (with thicker material, the weight limits allowed by the installations are quickly reached). Finally, the fact that the tube itself is a closed shape, i.e. with one side opposite the side to be cut, limits the maximum power that can be used to prevent burns and overheating of cut and uncut walls.
The sheet does not have the problem of having an opposite wall and therefore the power used to cut (when well managed) once it has exceeded the thickness is dispersed onto the support grid.
The main differences between tube and sheet laser cutting: conclusions In conclusion, we have seen some of the elements that can make the choice of a laser tube cutting system complex and different from the choice of a sheet system. There may be many others depending on the application area and productivity and sustainability expectations.
Cr: blog.blmgroup.com
บริษัท สุทอง แมชชีนเนอรี่ จำกัด ดำเนินการธุรกิจนำเข้าและเป็นตัวแทนจำหน่ายเครื่องจักรอุตสาหกรรมงานโลหะ เครื่อง CNC และ Cobot (Collaborative Robot) ครบวงจร
- สามารถเข้าชมเครื่องจักรได้ที่โชว์รูม สุทอง แมชชีนเนอรี่
- เวลาเปิดทำการ : จันทร์-เสาร์ (8.00-17.00 น.) โทร 02-896-1818
- ติดตามข่าวสารได้ที่แฟนเพจ : Suthong1990